주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

-[* red] Use a heat gun and carefully apply heat to the digitizer panel to soften the adhesive that secures it to the frame.
+[* red] Use an iOpener or heat gun and carefully apply heat to the digitizer panel to soften the adhesive that secures it to the frame.
[* icon_note] Hold the heat gun approximately 8-10 inches from the device and apply heat in a gentle back-and-forth motion.