주요 콘텐츠로 건너뛰기

이 단계의 변경 사항

Patrick Finnerty- 에 의해 수정

편집 승인됨 완료자 Craig Lloyd

이전
이후
변경 사항이 없습니다

단계 라인

+[* black] Thoroughly clean the edges of the frame. You need to make sure that all the glue that was keeping the old screen attached to the frame is removed. This will ensure that the new screen and digitizer assembly fits properly in the frame with the replacement adhesive.
+[* black] This step can be tedious if you had a shattered screen. Be patient and remove every single shard. Be careful not to hurt yourself against any sharp edges.

이미지 1

이전 이미지 없음

추가