주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#9단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Use a spudger to remove the connector from the device, and remove the screen completely.
[* icon_reminder] Before applying new adhesive, clean the edges of the frameframe, taking special care to remove any small glass fragments. Clean adhesion areas with high concentration isopropyl alcohol (at least 90%)90%).
[* black] Be sure
to remove any oldturn on your phone and test your repair before installing new adhesive residueand resealing the phone.
[* icon_reminder] Before applying new adhesive, clean the edges of the frameframe, taking special care to remove any small glass fragments. Clean adhesion areas with high concentration isopropyl alcohol (at least 90%)90%).
[* black] Be sure
to remove any oldturn on your phone and test your repair before installing new adhesive residueand resealing the phone.
[* icon_reminder] The replacement adhesive should only be applied to the edges of the frame, but may come with the center filled in.
[* black] To remove the unnecessary center section of the adhesive strip, carefully peel away the perforated rectangle in middle of the white backing. At the same time, peel up the black adhesive underneath the white backing.
[* icon_note] Only adhesive for the edges of the frame should remain.