주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#9단계의 변경 사항

Taylor Dixon- 에 의해 수정

편집 승인됨 완료자 Taylor Dixon

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use a spudger to remove the connector from the device, and remove the screen completely.
[* icon_note] Check carefully to make sure your replacement part matches, and that you've removed all the necessary parts from the old screen for installation in the new one.
[* black] Some replacement displays do not come with an earpiece speaker grille. If this is the case, transfer the grille from your old display to the new one.
[* icon_reminder] Before applying new adhesive, clean the edges of the frame, taking special care to remove any small glass fragments. Clean adhesion areas with high concentration isopropyl alcohol (at least 90%).
[* black] Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.
[* icon_reminder] The replacement adhesive should only be applied to the edges of the frame, but may come with the center filled in.
[* black] To remove the unnecessary center section of the adhesive strip, carefully peel away the perforated rectangle in middle of the white backing. At the same time, peel
pry up the black adhesive underneath the white backing.
[* icon_note] Only adhesive for the edges of
[guide|25629|display cable connector|stepid=70308|new_window=true], freeing the frame should remaindisplay.
[* black] Use a spudger to remove the connector from the device, and remove the screen completely.
[* icon_note] Check carefully to make sure your replacement part matches, and that you've removed all the necessary parts from the old screen for installation in the new one.
[* black] Some replacement displays do not come with an earpiece speaker grille. If this is the case, transfer the grille from your old display to the new one.
[* icon_reminder] Before applying new adhesive, clean the edges of the frame, taking special care to remove any small glass fragments. Clean adhesion areas with high concentration isopropyl alcohol (at least 90%).
[* black] Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.
[* icon_reminder] The replacement adhesive should only be applied to the edges of the frame, but may come with the center filled in.
[* black] To remove the unnecessary center section of the adhesive strip, carefully peel away the perforated rectangle in middle of the white backing. At the same time, peel
pry up the black adhesive underneath the white backing.
[* icon_note] Only adhesive for the edges of
[guide|25629|display cable connector|stepid=70308|new_window=true], freeing the frame should remaindisplay.