Bicycle Handlebar Tape Replacement 단계 #4 기록

#4단계의 변경 사항

편집자 Jordan Byrnes- 2017년 5월 14일

편집 승인됨 완료자 Jordan Byrnes

+	[* black] On the left side of the handlebar, wrap the tape around the end in a counter-clockwise direction moving inward.
+	[* black] Using the scissors, cut the tape at an angle towards the inside of the bar.
+	[* black] Wrap the loose end with either electrical tape or the adhesive piece provided with the handlebar tape.