주요 콘텐츠로 건너뛰기

#3 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] LiftPull the SATA data cable connector up offaway from its socket on the logic board.
[* icon_caution] This cable is held extremely tightly in its socket. Use extreme care when removing thisicon_note] The SATA connector on most iMacs tends to avoid thestick in its socket pulling up offon the logic board. If you are having trouble disconnecting the SATA cable, insert a [product|IF145-012|metal spudger] or any other thin tool into the gap between the SATA connector and its socket and twist the spudger's shaft to safely separate the two pieces.
[* black] LiftPull the SATA data cable connector up offaway from its socket on the logic board.
[* icon_caution] This cable is held extremely tightly in its socket. Use extreme care when removing thisicon_note] The SATA connector on most iMacs tends to avoid thestick in its socket pulling up offon the logic board. If you are having trouble disconnecting the SATA cable, insert a [product|IF145-012|metal spudger] or any other thin tool into the gap between the SATA connector and its socket and twist the spudger's shaft to safely separate the two pieces.