주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 완료자 Arthur Shi

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Slide the opening pick up the side of the battery to break apart remaining adhesive.
[* black] Lift the battery out of the case.
[* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.
-[* icon_reminder] To install a new battery:
- [* black] Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.
- [* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).
- [* black] Press the battery firmly into place for 5-10 seconds.
+[* icon_reminder] To install a new battery and adhesive, [guide|123541|follow this guide.|new_window=true]