주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#7단계의 변경 사항

Alicia- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_note] The fingerprint sensor cable connects the phone to the rear glass near the main camera. The cable is very short and should disconnect as the rear glass is removed.
[* icon_caution] As you lift the glass, peek in to be sure the orange cable with a blue connector has disconnected.
[* black] Use the opening picks to slice through any remaining adhesive and open the phone slightly.
[* icon_caution] If the fingerprint sensor cable seems snagged or stays taughttaut do not open the phone any further. Disconnect the connector with the point of a spudger before proceeding.
[* icon_caution] If the fingerprint sensor cable seems snagged or stays taughttaut do not open the phone any further. Disconnect the connector with the point of a spudger before proceeding.
[* black] Remove the glass from the phone.