#1단계의 변경 사항
brentp- 에 의해 수정
편집 거부됨 완료자 David Hodson
- 이전
- 이후
- 변경 사항이 없습니다
단계 라인
[* black] Remove the following 12 screws securing the front bezel to the rear case: |
[* red] Eight 13 mm T8 Torx. |
[* orange] Four 25 mm T8 Torx. |
[* icon_note] On the 24" iMac Intel Model A1225, the bottom center two screws are long (26mm), four on sides (two left, two right) are medium (18mm), and the remaining 6 (four top, two bottom corners) are short (14mm). |
[* black] Another possible combination: The top 4 and left 2 are short (14mm), the right two and bottom corners are medium (18mm), and the bottom center two are extra long (31mm). |