#4단계의 변경 사항
편집자 Sam Goldheart-
편집 승인됨 완료자 Sam Goldheart
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Both flaps of the adhesive strips are placed at the upper end of the battery. |
|---|---|
| - | [* black] Pull the first adhesive strip in a slow and constant movement. If necessary use a tweezer to get a first grip. |
| - | [* icon_note] The adhesive strips are less likely to rip if you pull them horizontally in a straight line and not upwards or in any other direction. |
| + | [* icon_note] The adhesive strips at the top of the battery are less likely to rip if you pull them horizontally in a straight line and not upwards or in any other direction. |
| + | [* black] Use a set of tweezers to unfold the black tab enough to grab with your fingers. |
| + | [* black] Pull the first adhesive strip in a slow and constant movement. |
| + | [* icon_note] Jerking or slackening your grip can cause the adhesive to bunch up and rip. |