Skip to main content

#1 단계의 변경 사항

Biff Wheeler- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] In picture 1, startStart by removing these three screws. The first two on the left are longer, coarse thread for the plastic, the one on the right is a fine thread that taps into the metal plate underneath.
[* black] In picture 2, remove the two coarse thread screws on the left side of the camera.
[* black] In picture 3, remove the two fine thread screws on the right side of the camera. We'll remove the last screw holding the camera halves together in our next step.
[* black] In picture 1, startStart by removing these three screws. The first two on the left are longer, coarse thread for the plastic, the one on the right is a fine thread that taps into the metal plate underneath.
[* black] In picture 2, remove the two coarse thread screws on the left side of the camera.
[* black] In picture 3, remove the two fine thread screws on the right side of the camera. We'll remove the last screw holding the camera halves together in our next step.

이미지 2

이전 버전

새로운 버전

이미지 3

이전 버전

새로운 버전