주요 콘텐츠로 건너뛰기

#6 단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 에 의해 Adam O'Camb

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Inspect the logic board and any connectors for [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s|signs of corrosion|new_window=true], especially in areas where the liquid contact indicators have changed colorare red.
[* black] Inspect the logic board and any connectors for [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s|signs of corrosion|new_window=true], especially in areas where the liquid contact indicators have changed colorare red.
[* black] Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out or replaced.
[* black] If there are no signs of moisture, leave the phone disassembled in a warm, dry place for a day or two to make sure any trapped water evaporates.
[* black] If there are signs of moisture, the phone fell into dirty/acidic/sticky liquid, or you just want to be safe, continue for more thorough cleaning.