주요 콘텐츠로 건너뛰기

#6 단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 에 의해 Adam O'Camb

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] If you phone was fully submerged for any amount of time, it is likely some of the internal components [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s|corroded|new_window=true]. Corrosion looks like a white, chalky film covering pins and connectors, and is especially prevalent on those that carry current. Corrosion dissolves metals and will cause malfunctions in your phone.
[*
black] Inspect the logic board and any connectors for [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s|signssigns of corrosion|new_window=true]corrosion, especially in areas where the liquid contact indicatorsLCIs are red.
[*

[*
black] Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a brush, or replaced if cleaning is not practical.
[* black] If all liquid contact indicatorsLCIs are white, and there is no moisture or corrosion, leave the phone disassembled in a warm, dry place for a day or two to make sure any potentially trapped liquid evaporates, then reassemble the phone.
[* black] If thereany LCIs are signs of moisturered, there is corrosion, the phone fell into dirty/acidic/sticky liquid, or you just want to be safe, continue for more thorough cleaning.
[* icon_note] If you phone was fully submerged for any amount of time, it is likely some of the internal components [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s|corroded|new_window=true]. Corrosion looks like a white, chalky film covering pins and connectors, and is especially prevalent on those that carry current. Corrosion dissolves metals and will cause malfunctions in your phone.
[*
black] Inspect the logic board and any connectors for [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s|signssigns of corrosion|new_window=true]corrosion, especially in areas where the liquid contact indicatorsLCIs are red.
[*

[*
black] Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a brush, or replaced if cleaning is not practical.
[* black] If all liquid contact indicatorsLCIs are white, and there is no moisture or corrosion, leave the phone disassembled in a warm, dry place for a day or two to make sure any potentially trapped liquid evaporates, then reassemble the phone.
[* black] If thereany LCIs are signs of moisturered, there is corrosion, the phone fell into dirty/acidic/sticky liquid, or you just want to be safe, continue for more thorough cleaning.