주요 콘텐츠로 건너뛰기

#9 단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 에 의해 Adam O'Camb

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use a detail brush to gently scrub away any corrosion and liquid residue on the logic board and other components.
[* icon_caution] Be carful not to push down too hard with the brush on delicate logic board components.
[* icon_note] Pay special attention to cable ends, battery contacts, connectors, pins, and fuses as these parts are prone to corrosion and can easily cause the phone to malfunction.
[* black] Keep the logic board and any other alcohol-covered components over a cloth to avoid spilling any alcohol. Contact with alcohol can mardamage certain materials.
[* black] Keep the logic board and any other alcohol-covered components over a cloth to avoid spilling any alcohol. Contact with alcohol can mardamage certain materials.
[* black] If needed, repeat steps 9 and 10 until all corrosion and residue is gone.