주요 콘텐츠로 건너뛰기

#11 단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 에 의해 Adam O'Camb

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] If you were unable to remove all the EMI shields, use compressed air or a blow-dryer on its cold setting to blow underneath the shields and dry out any trapped alcohol.
[* black] When all components look clean and dry, reapply any EMI shields that you removed and looselybegin to reassemble the phone with a new battery, and a new display if necessary.
[* icon_noteblack] Do not apply any adhesive or finish assemblingcompletely assemble the phonephone yet. Make sure internal components are screwed down and everything is plugged in, including the battery and display cable, but do not apply adhesive oradhesive, replace external screws to retain easy access to internal parts.
[* icon_caution] Lithium and other types of rechargeable batteries do not tolerate submersion well. Again, any sign of bubbling, bulging, melting
screws, or discoloration onseat the battery indicates that it is toast. Use a fireproof (glass, ceramic, or metal) container for temporary storage and transportation to a battery recycling facilitydisplay.
[* icon_note] See [http://www.call2recycle.org/safety/damaged-defective-and-recalled-batteries/|this site|new_window=true] for safety guidelines regarding damaged batteries. Make sureIt is safe to recycle your old battery and other e-waste at a [[E-Waste|certified recycler|new_window=true]]start the phone like this, but turn the phone back off before you start working inside it again. We just want to test the phone while keeping the internals accessible in case there are any problems.
[* black] When all components look clean and dry, reapply any EMI shields that you removed and looselybegin to reassemble the phone with a new battery, and a new display if necessary.
[* icon_noteblack] Do not apply any adhesive or finish assemblingcompletely assemble the phonephone yet. Make sure internal components are screwed down and everything is plugged in, including the battery and display cable, but do not apply adhesive oradhesive, replace external screws to retain easy access to internal parts.
[* icon_caution] Lithium and other types of rechargeable batteries do not tolerate submersion well. Again, any sign of bubbling, bulging, melting
screws, or discoloration onseat the battery indicates that it is toast. Use a fireproof (glass, ceramic, or metal) container for temporary storage and transportation to a battery recycling facilitydisplay.
[* icon_note] See [http://www.call2recycle.org/safety/damaged-defective-and-recalled-batteries/|this site|new_window=true] for safety guidelines regarding damaged batteries. Make sureIt is safe to recycle your old battery and other e-waste at a [[E-Waste|certified recycler|new_window=true]]start the phone like this, but turn the phone back off before you start working inside it again. We just want to test the phone while keeping the internals accessible in case there are any problems.