메인 콘텐츠로 스킵하기

#8 단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 에 의해 Sam Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_noteicon_reminder] When replacing the cover, pull out the AV/USB rubber cover. This makes it easier to put both of the case pieces back together.
[* blackicon_reminder] Replace the front cover first. Leave the bottom of the cover out at a bit of an angle, it makes it easier to attach the top fingers when you replace the back cover.
[* blackicon_reminder] To put the back cover on, start at the top and snap the three latches together. The cover screws can be replaced in any order you please.
[* icon_noteicon_reminder] When replacing the cover, pull out the AV/USB rubber cover. This makes it easier to put both of the case pieces back together.
[* blackicon_reminder] Replace the front cover first. Leave the bottom of the cover out at a bit of an angle, it makes it easier to attach the top fingers when you replace the back cover.
[* blackicon_reminder] To put the back cover on, start at the top and snap the three latches together. The cover screws can be replaced in any order you please.