메인 콘텐츠로 스킵하기

#8 단계의 변경 사항

Shelby Hemphill- 에 의해 수정

편집 승인됨 에 의해 Marty Rippens

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_reminder] When replacing the cover, pull outcover,remove the AV/USB rubber cover. This makes itcover for easier to put both of the case pieces back togetherreconstruction.
[* icon_reminder] Replace the front cover first. Leavefirst leaving a small gap on the bottomleft hand side of the cover out at a bitdevice for easy reattachment of an angle, it makes it easier to attach the top fingers when you replace the back cover.
[* icon_reminder] To putReattach the back cover on, start atby aligning it with the topfront cover and snapsnapping the three latches together. The coverinto place. Secure with screws can be replaced in any order you pleaseorder.
[* icon_reminder] When replacing the cover, pull outcover,remove the AV/USB rubber cover. This makes itcover for easier to put both of the case pieces back togetherreconstruction.
[* icon_reminder] Replace the front cover first. Leavefirst leaving a small gap on the bottomleft hand side of the cover out at a bitdevice for easy reattachment of an angle, it makes it easier to attach the top fingers when you replace the back cover.
[* icon_reminder] To putReattach the back cover on, start atby aligning it with the topfront cover and snapsnapping the three latches together. The coverinto place. Secure with screws can be replaced in any order you pleaseorder.