주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#6단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_reminder] During reassembly, if installing the AirPort card proves challenging, you can use curved tweezers to help orient the card and insert it into its slot on the back of the logic board.
[* black] With the tweezers pointed downwards, insert the points of the tweezers through the screw holes in the AirPort card, next to its antenna connector sockets.
[* black] Using your finger, press down on the edge of the AirPort card to angle it until it is roughly parallel to the logic board.
[* black] Align the AirPort card with its slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.
[* icon_note] For reference, the third photo shows the logic board removed and flipped over for a clear view of how the AirPort card is installed.

이미지 1

이전 이미지 없음

추가

이미지 2

이전 이미지 없음

추가

이미지 3

이전 이미지 없음

추가