주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#8단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 완료자 Arthur Shi

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_caution] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
[* icon_caution] Do not let any of the exposed solder joints come in contact with a metal surface, as that can cause a short.
[* icon_note] Flip the power supply over to access the DC power cable connection behind the logic board.
[* black] Squeeze the tab[https://d3nevzfk7ii3be.cloudfront.net/igi/2WIdmLVMDvtTNjQZ|the tab|new_window=true] on the far side of the DC power cable connector and pull
[* black] Pull
the connector straight out of its socket on the back of the logic board.
[* black] Squeeze the tab[https://d3nevzfk7ii3be.cloudfront.net/igi/2WIdmLVMDvtTNjQZ|the tab|new_window=true] on the far side of the DC power cable connector and pull
[* black] Pull
the connector straight out of its socket on the back of the logic board.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 이미지 없음

추가