iMac G5 17" Model A1058 Power Supply Replacement 단계 #2 기록

#2단계의 변경 사항

편집자 Andrew Bookholt- 2009년 7월 20일

-	[* black] While depressing the connector lock, use a heavy duty spudger to pry the power supply connector away from its socket on the logic board.
+	[* black] While depressing the connector lock, insert the flat end of a heavy duty spudger into the gap between the power supply connector and its socket.
+	[* black] Twist the heavy duty spudger to slightly separate the connector from its socket.
	[* icon_note] It will be necessary to work from alternate sides until the connector is free.