Retina MacBook 2016 Opening Lower Case Assembly 단계 #1 기록

#1단계의 변경 사항

편집자 Noah- 2020년 3월 25일

편집 거부됨 완료자 Taylor Dixon

	[* icon_caution] Before proceeding, unplug and power down your MacBook. Close the display and lay it on a soft surface, top-side down.
+	[* icon_reminder] *2015-2017 Macbook models only:* To avoid logic board damage, when your MacBook repair is complete ''but before powering it on'', [guide\|107711\|connect it to low-voltage power] using a 5-Watt iPhone charger and a USB-C to USB-A cable.
	[* black] Remove the following eight screws securing the lower case:
	[* red] Two 1.8 mm P5 Pentalobe screws
	[* orange] Four 2.9 mm P5 Pentalobe screws
	[* yellow] Two 6.1 mm P5 Pentalobe screws
	[* icon_reminder] Note the orientation of the screws as you remove them—they need to be reinstalled at a slight angle.
	[* icon_reminder] Throughout this repair, [product\|IF145-167-4\|keep track of each screw\|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your device.