메인 컨텐츠로 가기

#10 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* red] Remove the single Phillips screw securing the inverter to the logic board.
[*
black] Insert wisdom hereLift the inverter straight up off the pins on the logic board.
[* icon_note] Be sure to lift the inverter straight up off the logic board, as the connector pins are very long and easily bent. If the pins bend during removal, use the connector on the inverter as a guide to bend them straight
.
[* red] Remove the single Phillips screw securing the inverter to the logic board.
[*
black] Insert wisdom hereLift the inverter straight up off the pins on the logic board.
[* icon_note] Be sure to lift the inverter straight up off the logic board, as the connector pins are very long and easily bent. If the pins bend during removal, use the connector on the inverter as a guide to bend them straight
.

이미지 1

이전 버전

새로운 버전