주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#10단계의 변경 사항

mayer- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* red] Remove the single 8 mm brass Phillips screw securing the inverter to the logic board.
[* red] Remove the single 8 mm brass Phillips screw securing the inverter to the logic board.
[* black] Lift the inverter straight up off the pins on the logic board.
[* icon_note] Be sure to lift the inverter straight up off the logic board, as the connector pins are very long and easily bent. If the pins bend during removal, use the connector on the inverter as a guide to bend them straight.