주요 콘텐츠로 건너뛰기

#23단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Insert wisdom hereGrab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.
[* black] When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip located on the underside of your logic board as well as its copper heat sink attached to the midplane.
[* icon_note] We have a [guide|744|thermal paste guide] that makes applying thermal paste a snap
.
[* black] Insert wisdom hereGrab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.
[* black] When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip located on the underside of your logic board as well as its copper heat sink attached to the midplane.
[* icon_note] We have a [guide|744|thermal paste guide] that makes applying thermal paste a snap
.

이미지 2

이전 이미지 없음

추가