주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#2단계의 변경 사항

mayer- 에 의해 수정

편집 거부됨 완료자 Evan Noronha

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use the tip of a spudger to push the camera cable connector out of its socket on the logic board.
[* icon_note] Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket. This is much easier if you do step 7 first.
[* icon_note] Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket. This is much easier if you do step 7 first.