주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#2단계의 변경 사항

Jody Foo- 에 의해 수정

편집 거부됨 완료자 Evan Noronha

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use the tip of a spudger to push the camera cable connector out of its socket on the logic board.
[* icon_note] Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket.
[* icon_note] If you are only going to replace or remove the right fan, removing the camera cable is not necessary. In [guide|27690|step 8|stepid=36674], just lift and free the cables from the adhesive that sticks them to the fan.