메인 콘텐츠로 스킵하기

#3 단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 에 의해 Adam O'Camb

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the tip of a spudger to flip up the retaining flap on the left fan ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, '''not''' the socket itself.
[* black] Starting at the top of the cable, slide a plastic opening tool under the left fan cable to free it from the logic board.
[* icon_caution] Use caution when freeing the cable, as it is strongly adhered to the logic board. If necessary, use an iOpener or hair dryer to heat the cable in order to soften the adhesive and make it easier to remove.
[* black] Lift the left fan out of the device.
[* icon_noteicon_reminder] When reinstalling the fan, it's easiest installconnect the fan ribbon cable as you drop the fan in place, rather than after you've installed the three fan screws.
[* icon_noteicon_reminder] When reinstalling the fan, it's easiest installconnect the fan ribbon cable as you drop the fan in place, rather than after you've installed the three fan screws.