메인 콘텐츠로 스킵하기

#3 단계의 변경 사항

Walter Galan- 에 의해 수정

편집 승인됨 에 의해 Walter Galan

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the pointed endtip of a spudger to flip up the retaining flap on the left fan ribbon cable ZIF connectorsocket.
[* icon_caution] Be sure you are prying up
on the logic boardhinged retaining flap, '''not''' the socket itself.
[* black] Use the pointed endtip of a spudger to flip up the retaining flap on the left fan ribbon cable ZIF connectorsocket.
[* icon_caution] Be sure you are prying up
on the logic boardhinged retaining flap, '''not''' the socket itself.
[* black] Starting at the top of the cable, slide a plastic opening tool under the left fan cable to free it from the logic board.
[* icon_caution] Use caution when freeing the cable, as it is strongly adhered to the logic board.
[* black] Lift the left fan out of the device.