주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

+[* black] Peel back any tape covering the keyboard ribbon cable connector.
[* black] Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
-[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
-[* black] Use the flat end of a spudger to pull the keyboard ribbon cable out of its socket.
+ [* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
+[* black] Use the flat end of a spudger to back the keyboard ribbon cable out of its socket.