Skip to main content

#1 단계의 변경 사항

Jake Devincenzi- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Remove the single 2.6 mm T5 Torx screw holding the left rubber hinge cover in place.
[*
black] Insert wisdom hereSlide the hinge cover out of its bezel, then lift it up and out of the device.
[* icon_note] The screw in the right hinge cover should already have been removed.
[* black] Slide the right cover out of its bezel, then lift it out of the device
.
[* red] Remove the single 2.6 mm T5 Torx screw holding the left rubber hinge cover in place.
[*
black] Insert wisdom hereSlide the hinge cover out of its bezel, then lift it up and out of the device.
[* icon_note] The screw in the right hinge cover should already have been removed.
[* black] Slide the right cover out of its bezel, then lift it out of the device
.

이미지 1

이전 버전

새로운 버전