메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Walter Galan- 에 의해 수정

편집 승인됨 에 의해 Walter Galan

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Carefully slideInsert the edge of a plastic opening tool underunderneath the thick partupper microphone.
[* black] Slide the blade
of a plastic opening tool along the bottom of the upper microphone, releasing the microphone cableadhesive.
[* black] Carefully slideInsert the edge of a plastic opening tool underunderneath the thick partupper microphone.
[* black] Slide the blade
of a plastic opening tool along the bottom of the upper microphone, releasing the microphone cableadhesive.
[* icon_caution] Be careful when releasing the adhesive holding the cable down, as these cables have been known to tear easily.
[* black] SlideIn a similar manner, release the plastic opening tool along the length of the cable until you release all ofadhesive underneath the adhesivelower microphone.
[* black] SlideIn a similar manner, release the plastic opening tool along the length of the cable until you release all ofadhesive underneath the adhesivelower microphone.
[* black] Lift the cable out of the device.