주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#7단계의 변경 사항

Walter Galan- 에 의해 수정

편집 승인됨 완료자 Walter Galan

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* red] Remove four out of the outer foursix 5.3 mm T8 Torx screws holdingsecuring the hinges in placedisplay to the upper case.
[* icon_note] Do not remove the two inner-most screws just yet.
[* black] Open the device between 90 and 100 degrees, then rest it on its side.
[* red] While supporting both halves of the device with
We purposely have you leave one hand, unscrewscrew attaching the upper 5.3 mm T8 Torx screw.
[* red] Repeat the same process for the identical bottom screw.
[* icon_caution] Be sure
display to hold the display and upper case together with one hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each componentaid in future steps.
[* red] Remove four out of the outer foursix 5.3 mm T8 Torx screws holdingsecuring the hinges in placedisplay to the upper case.
[* icon_note] Do not remove the two inner-most screws just yet.
[* black] Open the device between 90 and 100 degrees, then rest it on its side.
[* red] While supporting both halves of the device with
We purposely have you leave one hand, unscrewscrew attaching the upper 5.3 mm T8 Torx screw.
[* red] Repeat the same process for the identical bottom screw.
[* icon_caution] Be sure
display to hold the display and upper case together with one hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each componentaid in future steps.

이미지 2

삭제됨

이미지 3

삭제됨