Skip to main content

#7 단계의 변경 사항

garegin- 에 의해 수정

편집 거부됨 에 의해 Jake Devincenzi

변경 사항이 없습니다

스텝 라인

[* red] Remove four out of the six 5.3 mm T8 Torx screws securing the display to the upper case.
[* icon_note] We purposely have you leave two screws attaching the display to the upper case to aid in future steps.
[* black] On the right side, the antenna cable has two ground tabs corresponding to the screwholes on the base. Make sure that the two tabs are held and go under those two screws.