Gateway NE Series DC Jack Replacement 단계 #1 기록

#1단계의 변경 사항

편집자 Joseph Sctbunio- 2017년 11월 26일

편집 승인됨 완료자 Joseph Sctbunio

	[title] Remove keyboard & power button cable
	[* icon_note] The keyboard has no screws to remove.
	[* red] Use a fine spudger to push all six keyboard tabs. On the first, you'll have to use a bit of prying to get under the keyboard. After that, get your fingernail under the keyboard, and pull gently as you go along the keyboard using the spudger to pop the other clips.
	[* icon_note] There is one un-pushable clip on each side of the keyboard. Don't try to push them. Instead, once you get the top of the keyboard up, pull the keyboard out of the clips.
	[* orange] Gently push each side of the locking connector's lock towards the screen, and then pull the now-loose keyboard cable out. Set the keyboard aside.
	[* yellow] Gently push each side of the power button locking connector towards the screen, and then pull the cable out.
+	[* black] Do the same for the touchpad cable.