주요 콘텐츠로 건너뛰기

#3 단계의 변경 사항

brittany- 에 의해 수정

편집 승인됨 에 의해 brittany

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Now the Test Frequency needs to be changed to 10KHz.
[* black] Press the Navigation button again, and select MEASURE. Then SETTING, then T.FREQ. Select 10KHz.
[* black] The number on the screen that appears is the capacitance between the two tweezer tips at their default distance. This is the Capacitance Offset.
[* black] The offset is varied by the distance between the tinestips. The smaller the component, the closer the tips are together, thus a higher offset evaluation.
[* black] The offset is varied by the distance between the tinestips. The smaller the component, the closer the tips are together, thus a higher offset evaluation.

이미지 1

이전 이미지가 없습니다

추가