메인 컨텐츠로 가기

#3 단계의 변경 사항

brittany- 에 의해 수정

편집 승인됨 에 의해 brittany

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Now the Test Frequency needs to be changed to 10KHz.
[* black] Press the Navigation button again, and select MEASURE. Then SETTING, then T.FREQ. Select 10KHz.
[* black] The number on the screen that appears is the capacitance between the two tweezer tips at their default distance. This is the Capacitance Offset.
[* black] The offset is varied by the distance between the tines. The smaller the component, the closer the tips are together, thus a higher offset evaluation.