주요 콘텐츠로 건너뛰기

#8단계의 변경 사항

편집자 Richard-

편집 승인됨 완료자 Richard

이전
이후
변경 사항 없음

단계 라인

-[* black] To remove the battery section of the device from the circuit board remove, use the small Phillips head screwdriver for the 3 small screws near the top.
+[* red] To remove the battery section of the device from the circuit board remove, use the small Phillips head screwdriver for the 3 small screws near the top.
[* black] To get the battery pack completely away from the circuit board there is copper foil on the back of the battery.
[* black] be careful not to rip the copper foil. Pull the foil slowly an evenly.