#6단계의 변경 사항
편집자 Brett Hartt-
편집 승인됨 완료자 Brett Hartt
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] Fine tune the derailleur by tightening or loosening the barrel adjuster screw. Loosening this screw causes the derailleur to move slightly towards a larger sprocket, while tightening it moves the derailler towards a smaller sprocket. |
|---|---|
| + | [* black] Shift through each gear while pedaling. The derailleur should move the chain one gear over each time you shift up or down. |
| + | [* black] If the chain skips or makes noise when you are not shifting, use the barrel adjustment screw to fine tune the derailleur alignment. |
| + | [* black] Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise. |