주요 콘텐츠로 건너뛰기
도움말
8단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Punch out the small receiver pin from right to left, as shown. It is important that you do it in this direction because the pin is installed at the factory from left to right, and has a knurled surface on one end to help hold it in place.

Punch out the rear takedown pin. Unlike the front takedown pin, this one will completely separate from the receiver.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.