주요 콘텐츠로 건너뛰기
도움말
13단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the cylinder, piston, tappet plate, and air nozzle assembly by lifting it up. Be careful not to lose the tappet plate spring when you do this.

Note that each gear may have one or more shims on them. Keep each shim in its original position and be careful not to mix up or lose any while removing the gears. Each gearbox has a unique shim configuration.

After the gears are out of the way, carefully pick up the anti-reversal latch and do not lose the small spring that is attached to it.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.