Skip to main content
Help
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use the flat end of a spudger to pry the thermal sensor bracket off the face of the hard drive.

If you're replacing your hard drive, transfer this bracket and the thermal sensor to your new hard drive. If the adhesive refuses to stick during reinstallation, apply double-stick tape to the underside of the two flat ears of the thermal sensor bracket.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.