주요 콘텐츠로 건너뛰기

iPhone 8 Plus 홈/Touch ID 센서 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

4 단계
iPhone 8 Plus Home/Touch ID Sensor Replacement: 0 단계, 이미지 1개 중 1개
  • Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.

  • Flip the display assembly over. Use a hairdryer or prepare an iOpener and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.

  • Don't overheat the display. It should be slightly too hot to touch comfortably.

홈/Touch ID 센서 주변을 가열하면 정교한 케이블을 제자리에 고정하는 접착제를 부드럽게 만들어 안전하게 분리할 수 있습니다.

디스플레이 어셈블리를 뒤집으세요. 헤어 드라이어를 사용하거나 iOpener를 준비하여 디스플레이 하단 가장자리를 약 90초 동안 가열하여 디스플레이 밑의 접착제를 부드럽게 만드세요.

디스플레이를 과열하지 마세요. 편안하게 만질 수 없을 정도로 약간 뜨거워야 합니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.