주요 콘텐츠로 건너뛰기

iPhone 8 Plus 홈/Touch ID 센서 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

6 단계 번역중

6 단계
iPhone 8 Plus Home/Touch ID Sensor Replacement: 0 단계, 이미지 1개 중 1개
  • Remove the home/Touch ID sensor assembly by lifting it through the front side of the display.

  • To reinstall, first feed the cable through the hole in the front of the display as shown.

  • Your replacement part may come with extra Y000 screws already installed near the Home Button. Remove the unnecessary screws so that you can reinstall the home button bracket.

디스플레이 전면을 통해서 홈/Touch ID 센서 어셈블리를 들어 올려 분리하세요.

재설치하려면 먼저 사진 처럼 디스플레이 전면 구멍을 통해 케이블을 넣으세요.

교체 부품 홈 버튼 근처에 여분의 Y000 나사가 이미 설치되어 있을 수 있습니다. 홈 버튼 브래킷을 다시 설치할 수 있도록 불필요한 나사를 풀어주세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.