주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Once the LCD has been removed from the frame, the Digitizer can be gently pushed out from the back.

Be sure to catch the speaker cover as it is released from the digitizer, you will need to replace it when reinstalling the digitizer.

There is adhesive tape holding the Digitizer to the front panel, heating around the edges of the digitizer will help to loosen it, if it sticks.

After the digitizer is removed, you may wish to remove the adhesive tape and reapply before replacing the digitizer.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.