Skip to main content
Help
6단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

During reassembly, if installing the AirPort card proves challenging, you can use curved tweezers to help orient the card and insert it into its slot on the back of the logic board.

With the tweezers pointed downwards, insert the points of the tweezers through the screw holes in the AirPort card, next to its antenna connector sockets.

Using your finger, press down on the edge of the AirPort card to angle it until it is roughly parallel to the logic board.

Align the AirPort card with its slot on the logic board, and press the card into the slot until the screw holes nearest the connector align with those in the logic board.

For reference, the third photo shows the logic board removed and flipped over for a clear view of how the AirPort card is installed.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.