주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the motor by unsoldering the cords from the main circuit board.

The motor will either have blue and red cords, or black and white cords, with two of each kind on opposite sides of the drone. It is important that the new motor spins the same direction as the old one, and that you connect the leads to the correct port.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.