Skip to main content
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Disconnect both of the following connectors from the logic board:

Sleep sensor cable.

Power button cable.

Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.

When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.