주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

While high hours are not an indication of failure, these drives are more likely to fail.

GSmartControl can be used in Ubuntu if you cannot read the output from Disks.

Boot your system into a live Ubuntu session. Locate the Disks application and select the hard disk you want to test.

From the drop-down menu, select SMART Data and Self Tests. This will pull up the SMART data.

Locate the following SMART attributes: Power On Hours and Power Cycle Count.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.