주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use the tip or the flat end of a nylon spudger to unlock the connector securing the flat cable of the keyboard to the logic board.

Pull the flat cable out not up.

When re-assembling, insert and hold the flat cable in place with one hand; use the other hand to lock the connecter using the tip or flat end of a nylon spudger. If you release the flat cable before locking the connector, it will most probably slip out.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.