주요 콘텐츠로 건너뛰기
도움말
14단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

With the screw set into the receiver you can now add the bolt catch.

Start by placing the spring in the hole next to the 2mm screw and then place bolt catch piece with the other end of the spring going into it's own hole.

Then press the small pin into place. Once the pin is far enough in that it hold the bolt catch in place you can use a punch to get the pin in the rest of the way.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.